Electrical Cables
Industrial Energy Storage System
Rack-mounted and containerized LFP battery energy storage systems for C&I and utility-scale applications. 100kWh to MWh scale, peak shaving, backup power and grid stabilization, IEC 62619 / UL9540 certified.
KEY FEATURES
- LFP (LiFePO₄) cell chemistry — >6,000 cycles at 80% DOD, no thermal runaway risk
- Capacity range 100kWh to MWh scale — scalable by adding rack or container modules
- System voltage 192V / 384V / 768V DC — compatible with most commercial inverters
- Active BMS with SOC / SOH monitoring, cell balancing and fault protection
- Enclosure options: 19-inch rack, 20ft and 40ft standard container with HVAC
- IEC 62619 and UL9540 certified — suitable for C&I, utility and grid-scale projects
MOQ / Project-based
Lead Time / 15-30 days
Supply / B2B / Wholesale
Origin / China
Product Overview
Industrial battery energy storage systems (BESS) store electrical energy from the grid or renewable sources and discharge it on demand. For commercial and industrial users, the primary applications are peak shaving to reduce demand charges, backup power for critical loads, and integration with solar or wind generation for self-consumption.
RichingPower supplies LFP-based industrial BESS in rack-mounted format for smaller capacity requirements and containerized format for large-scale installations. All systems include an integrated BMS, thermal management, fire detection and AC/DC protection. Container systems include HVAC, lighting and remote monitoring as standard.
Systems are delivered as complete, pre-tested units ready for site installation. Custom capacity, voltage configuration and communication protocol are available for project-specific integration requirements.
Why LFP for Industrial BESS
>6,000 cycles at 80% DOD — 3× longer than NMC, lower lifetime cost
No thermal runaway under normal operation — lower fire risk for indoor installation
Cleaner supply chain, better ESG compliance for international projects
–20°C to +60°C operation, heating option for cold climates
| Parameter | Specification |
|---|---|
| Cell Chemistry | LFP (LiFePO₄) |
| Capacity Range | 100kWh – MWh scale (scalable by module) |
| System Voltage | 192V / 384V / 768V DC |
| Cycle Life | >6,000 cycles at 80% DOD (25°C) |
| Round-trip Efficiency | >92% |
| BMS | Active balancing, SOC / SOH monitoring, cell-level protection |
| Enclosure Options | 19-inch rack / 20ft container / 40ft container |
| Thermal Management | Air cooling (rack) / HVAC (container) |
| Fire Protection | Aerosol or FM200 suppression system (container) |
| Communication | CAN, RS485, Modbus, SCADA / EMS integration |
| Operating Temperature | –20°C to +55°C (with heating option for cold climates) |
| Certifications | IEC 62619, UL9540, CE, UN38.3 |
Industrial BESS supplied by RichingPower are certified to the following standards. Please specify required certifications and destination country when submitting an enquiry.
Industrial BESS are deployed wherever large-scale energy storage can reduce costs, improve reliability or enable renewable energy integration. System sizing depends on peak demand, daily energy throughput and target backup duration.
Request a Quotation
Send us your load profile and project details. Our team will recommend a suitable BESS configuration and provide indicative pricing within 24 hours.
What to include in your enquiry:
We reply within 24 hours with a recommended configuration and indicative pricing. Load profile data helps us prepare the most accurate sizing recommendation.
Send Enquiry
Contact us via the enquiry form or WhatsApp for a faster response.
Go to Enquiry Form → WhatsApp Us