Contact Us

Home / Products / Inverter / Network Cable

A close-up 3D illustration showing a cross-section of the Ethernet cable, revealing four pairs of twisted colored wires (orange, green, blue, brown) inside a black outer jacket. The text highlights its eight-core double twisted structure for stable and anti-interference performance, noting that thicker conductors provide stronger toughness to extend the cable's lifespan.

Electrical Cables

Network Cable

Cat5e, Cat6 and Cat6A twisted-pair Ethernet cables for structured cabling in data centers, server rooms, office buildings and campus networks. UTP and SFTP options, 305m bulk reels and pre-terminated patch cords, ISO/IEC 11801 and TIA-568 standard.

  • Cat5e (100MHz), Cat6 (250MHz) and Cat6A (500MHz) — full range for all structured cabling projects
  • UTP, FTP and SFTP shielding options — unshielded for standard use, shielded for EMI environments
  • Solid copper conductor — 23AWG (Cat6 / Cat6A) and 24AWG (Cat5e) for horizontal cabling
  • LSZH, PVC and outdoor PE jacket options for different installation environments
  • Available as 305m bulk reels or pre-terminated patch cords from 0.5m to 10m
  • ISO/IEC 11801 and TIA-568-C certified — suitable for data center and commercial building projects
Send Enquiry
WhatsApp Us

MOQ / Project-based

Lead Time / 15-30 days

Supply / B2B / Wholesale

Origin / China

Product Overview

Network cables — commonly referred to as Ethernet cables or structured cabling — form the physical infrastructure for data transmission in LANs, data centers and building networks. The cable category determines the maximum bandwidth and data rate supported over a standard 100-meter horizontal cabling run.

RichingPower supplies Cat5e, Cat6 and Cat6A cables in both UTP (unshielded) and SFTP (shielded) versions. Bulk reels in 305m boxes are the standard format for structured cabling installations. Pre-terminated patch cords are available for panel room wiring and equipment connections.

All cables are manufactured to ISO/IEC 11801 and TIA-568-C and are available with LSZH jacket for data center and plenum installations. Outdoor-rated PE jacket cables are available for direct burial and external runs between buildings.

Category Selection Guide

Cat5e — 100MHz / 1Gbps
General office LAN, light PoE — most cost-effective for low-density deployments
Cat6 — 250MHz / 1–10Gbps
Modern office structured cabling, PoE+ — standard choice for new installations
Cat6A — 500MHz / 10Gbps
Data center horizontal cabling, PoE++ — recommended for Tier III and above
Parameter Cat5e Cat6 Cat6A
Max Bandwidth100 MHz250 MHz500 MHz
Max Data Rate1 Gbps1–10 Gbps10 Gbps
Max Distance (10G)—55m100m
Conductor24AWG solid Cu23AWG solid Cu23AWG solid Cu
Pairs4 pairs4 pairs4 pairs
Shielding OptionsUTP / FTPUTP / FTPSFTP / S/FTP
Jacket OptionsPVC / LSZHPVC / LSZHPVC / LSZH
PoE SupportPoE / PoE+PoE / PoE+PoE / PoE+ / PoE++
Bulk Reel305m box305m box305m box
Applicable StandardsISO/IEC 11801, TIA-568-CISO/IEC 11801, TIA-568-CISO/IEC 11801, TIA-568-C

Network cables supplied by RichingPower are manufactured to the following structured cabling standards. Please specify the required standard and category when submitting an enquiry.

ISO/IEC 11801
International standard for generic cabling for customer premises — Ed. 3 covers Cat5e through Cat8.
TIA-568-C (ANSI)
US standard for commercial building telecommunications cabling systems — widely specified for US projects.
EN 50173
European standard for information technology generic cabling systems — aligned with ISO/IEC 11801.
IEC 60332-3
Flame retardant classification for cables installed in bunched runs in buildings.
IEC 60754 (LSZH)
Halogen content and low smoke emission classification for cables in confined spaces.
IEEE 802.3
Ethernet standard defining physical layer requirements — cables tested for compatibility with 1G, 10G and PoE applications.

Network cables are the foundation of every modern building and data center network. Category selection depends on required bandwidth, link distance and PoE power budget.

Data Center Cabling
Cat6A SFTP for horizontal cabling from patch panels to server rack switches — supports 10Gbps to full 100m and high-density PoE++ for powered devices.
Office Building LAN
Cat6 UTP for horizontal cabling from floor distribution frames to workstation outlets — cost-effective for standard office gigabit networking.
Server Room Patch Panels
Pre-terminated patch cords for panel-to-switch connections, server port connections and equipment room cross-connections.
Campus Networks
Outdoor PE-jacketed Cat6 or Cat6A for direct burial or conduit runs between buildings on university, hospital and industrial campuses.
PoE Systems
Cat6A for PoE++ applications including wireless access points, IP cameras, smart lighting controllers and digital signage requiring up to 90W per port.
Industrial Ethernet
SFTP Cat6A for industrial panel rooms and factory floors — shielded construction provides EMI resistance in environments with heavy electrical equipment.

Request a Quotation

Send us your port count, floor area or cable schedule. We support project procurement for structured cabling installations of any scale — from single floor to full campus deployments.

What to include in your enquiry:

–Cable category — Cat5e, Cat6 or Cat6A
–Shielding — UTP, FTP or SFTP
–Jacket — PVC, LSZH or outdoor PE
–Quantity — number of 305m boxes or total meters
–Patch cords — category, length and quantity (if required)
–Applicable standard — ISO/IEC 11801, TIA-568 or other
–Destination country

We reply within 24 hours. For full structured cabling projects, send your port count and floor plan area for a quantity estimate and consolidated quotation.

Send Enquiry

Contact us via the enquiry form or WhatsApp for a faster response.

Go to Enquiry Form → WhatsApp Us
✓ Reply within 24 hours
✓ Cat5e / Cat6 / Cat6A available
✓ Bulk reels and patch cords
✓ B2B / Project supply

Power cable,
electrical equipment,
inverter,
and energy storage supplier from China.

Our Story

Product

Company

Follow Us

Facebook Youtube Whatsapp
Scroll to Top